AfroFuture Factories
Planes: lift, light materials and test flights
Ethiopian Airlines runs one of the biggest aircraft maintenance centres in Africa, and in Rwanda delivery drones fly blood to hospitals. In the AfroFuture world, African engineers design and build a small electric training plane. The science of flight is real.
- → 1. Choosing materials
- 🔒 2. Wing test
- 🔒 3. Motor and battery
- 🔒 4. Assembly
- 🔒 5. Test flight
Welcome to the AfroFuture aircraft factory
- ⌨️ W A S D or arrow keys to walk, Shift to go faster (or the arrow buttons).
- 🖱️ Drag to look around.
- 🚶 Walk up to each machine in order. Follow the glowing arrow, then click the machine or press Start.
- 📋 Follow the work orders and download your lab report.
- ✈️ At the end, design your plane's colours and see where the money goes.
Building and flying, for real
Real photos in the order the factory works. Captions say where photos come from outside Africa.
1. Ethiopian Airlines' aircraft maintenance centre in Addis Ababa.Photo: Alan Wilson · CC BY-SA 2.0 · source
2. Engineer Mary Jackson with a wind tunnel model. (Photo from the USA.)Photo: NASA, restored by Adam Cuerden · Public domain · source
3. A Zipline delivery drone landing in Rwanda.Photo: Roksenhorn · CC BY-SA 4.0 · source
4. An Ethiopian Airlines plane in Addis Ababa.Photo: Gilbrt2020 · CC BY-SA 4.0 · source
Copy prompt for Lovable
Paste this into the Pan African Global Open Curriculum project to add this factory there.
Add the "Planes" hall to the AfroFuture Factories world in the Pan African Global Open Curriculum, same 3D hall pattern as Cassava to Bioplastic. Paint: sky blue walls, sunset orange band with a navy mudcloth pattern. Stations: 1. Materials (Folake): a pull-test machine stretches same-size pieces (steel, aluminium, titanium, carbon fibre, pine, PVC) until they snap while a stress–stretch line draws; weigh the pieces; then drag a material onto the wing spar (best strength ÷ weight), motor mount (800+ MPa, 400+ °C) and skin (light repairable metal). 2. Wind tunnel (Khadija): sliders for tilt 0–20°, curve 0–6 %, wing length 4–12 m; animated smoke lines bend over the wing and break up past the 15° stall. CL = 0.11 × (tilt + 2 × curve), chord 1.2 m, 40 m/s air; drag includes CL²/(π·AR·0.8). Goal: lift 900 kg, lift/drag ≥ 12. 3. Motor and battery (Olumide): thrust stand with a spinning prop, throttle lever, thrust/current/power/temperature meters (thrust = 0.16 × kW^(2/3) kN); drag 10 kWh battery modules (50 kg) into the bay; mass = 560 + 0.25·kW + 5·kWh; take-off needs 30 % of weight; cruise kW = mass·9.81/12 × 50 / 0.8; fly 5 min climb + 35 min cruise and land with 20 % spare. 4. Assembly (Kwesi): a plane cutaway balanced on a fingertip; slide the 200 kg battery and 30 kg cargo along rails until the balance point is 25–30 % of the wing chord, then a test glide (smooth, dive, pitch-up stall or tumble). 5. Test flight (Imani): pre-flight check from behind the plane (stick, pedals; one surface may be rigged backwards and must be reported), then hold 900–1,100 m for 20 s in gusts with stick, throttle and trim and a stall warning below 32 m/s, then land on the runway following approach lights, touchdown under 2 m/s. Finale: design your plane livery; money slide. Real credited photos (Ethiopian Airlines, Zipline Rwanda). Mark science and prices for teacher review.